PRIMECURE W is a white to creamy, free-flowing liquid containing a high melting point wax that is colloidally suspended in an inert solvent.

PRIMECURE W is used as curing compound to aid concrete in attaining complete setting.

The old methods that are used in concrete curing are: regular water spraying, covering with wet burlap, and ponding. All three methods require regular inspection of the placed concrete to ensure that the surface of the concrete has not dried up.



These methods are not only impractical and time consuming, but are also costly especially when the placed concrete is not wetted on time. The latter will lead to incorrect and uneven curing and may cause the concrete to crack.

With a single spraying of PRIMECURE on placed concrete, there is no need for regular inspection. The PRIMECURE treated concrete will attain its expected strength and set evenly.



Specific gravity : 1.002 kg/m3

Ph: 7.65 @25 degrees Celsius

Boiling point: 100.5 degrees Celsius

Color: Creamy white



Concrete placed in roadwork, buildings, dams, floorings, etc.



PRIMECURE is applied by brush or with an industrial sprayer.

The sprayer must be clean and free from any oil or solvents before loading PRIMECURE.

Apply immediately after the fresh concrete is slightly surface dry but not yet fully dry.



PRIMECURE has a coverage ranging from 5 to 7.5 square meters per liter depending on the porosity of the substrate.


Available in 20 liter carboys, 200 liter steel drums, 1000 liter bulk containers



1 year on a properly sealed container

Market Specification

1000 liter bulk containers

200 liter drums

20 liter carbouys