POLYBOND is a white to creamy pre-treatment primer that penetrates to the concrete surface used to seal pores, giving a higher bonding strength to absorbent concrete. 

USES: 

 Pre-treatment of concrete floors prior to installation of PRIME SELF-LEVELLING COMPOUND. 

 Pre-treatment of concrete walls prior to installation of plaster mix. 

AREA OF USE:

Condominium floors and walls, chemical production areas, engineering plants, factories, etc. 

FEATURES AND BENEFITS: 

 High performance, ready to use primer 

 Excellent penetration properties 

 Solvent-free 

 Provides dust-free concrete floors 

 Good adhesion to concrete 

 Easy to apply 

 Odorless 

 Economical 

APPLICATION:

Surface Preparation 

Concrete surface should be thoroughly cleaned prior to application of POLYBOND, by removing dust, dirt, grease and concrete leftovers. 

Method of Application 

Brush or use roller in applying POLYBOND onto the surface. Allow to dry until the surface condition become slightly tacky. On porous floor, a second application is necessary after drying of the first layer. 

COVERAGE: 

POLYBOND has an approximate coverage of 10 sqm per liter (depends on porosity of surface).